STEDI Work Light Combo Pair of C-4 LED Light Cube Spot + 2 to 1 Splitter + Work Light Harness

SKU: NZOC-STEDI-C4-SPOT-KIT

$250

The STEDI Work Lights Combo is perfect to get all the gear you need to get your work lights setup.

What you get in this combo:

Essentially, you can get two lights wired up and running off a single loom and switch. These lights are awesome for chucking on the side of your roof-cage, at the rear of your truck or even on the corners of your bar!

Buy them all together and save from the full RRP!

Feel free to read the individual descriptions of each of the products below:

STEDI C-4 Black Edition LED Light Cube | Spot

he new STEDI C4 cube lights bring our work light range to a whole other level. Flood beam with outstanding performance, there is a solution to every lighting need.

 

 

GIANT SLAYING PERFORMANCE

Explosive performance, hence the name C-4. The instructions to our engineers were to hold nothing back, the goal was to produce the most powerful cube light on the market. Mission accomplished. Now the adventure doesn’t have to stop when the sun goes down thanks to class-leading CREE XM-L2 emitter producing 4,200 lumens of light intensity

STEDI 2 to 1 Deutsch Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m

Our 2 to 1 Deutsch Connector allow you to split a single plug into 2 allowing you to run 2 driving/work lights off the same switch & harness.

COMPATABILITY

Compatible with all wiring harnesses for LED, HID and Halogen Lights that run a DT connector. Make sure you are familiar with DT & DTP connectors as they are not cross compatible with one another.

DETAILS

2 to 1 Deutsch Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT2 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our 2 Output wiring harness

Cable Length is 900mm

Extended Length is 1500mm

SPECIFICATIONS

  • 16AWG Cable
  • Waterproof DT Connectors
  • Cable placed inside conduit

WHAT’S IN THE BOX

  • 2 to 1 Wiring Harness Splitter

STEDI LED Work Light Wiring Kit Loom Harness (Not high beam triggered)

Work Light Wiring Kit / Loom

DETAILS

STEDI - Fully Assembled Wiring kit for LED Work Lights or camp lights.

It contains everything you need to get your lights connected. Press button ON/OFF switch. The included relay is rated to 40A so you can use the one wiring kit to connect several light bars to the one wiring loom.

Featuring a total of 4.8 meters of wiring (full stretched out)

  • 2.8m of cabling from Relay to Switch
  • 2.0m of cabling from light connectors to Relay
  • 12vDC 30A Rated Fuse Kit
  • 12vDC 40A Switching Relay
  • ON/OFF Switch
  • UV Rated Insulation

Please note that this harness is not high beam activated, please refer to our other listing for our High Beam Trigger light harnesses.

SPECIFICATIONS

WIRING KIT RATING 12vDC 30A
RELAY RATING 12vDC 40A
FUSE 30A
CABLE LENGTH 4.5m +or-
SWITCH TYPE Dime Switch
INSTRUCTION Included
RATED 30A


WHAT’S IN THE BOX

  • 1 x 12v Work Light Wiring Kit
  • Waterproof Dime Switch

You may also like

Recently viewed