The STEDI Work Lights Combo is perfect to get all the gear you need to get your work lights setup.
What you get in this combo:
Essentially, you can get two lights wired up and running off a single loom and switch. These lights are awesome for chucking on the side of your roof-cage, at the rear of your truck or even on the corners of your bar!
Buy them all together and save from the full RRP!
Feel free to read the individual descriptions of each of the products below:
STEDI C-4 Black Edition LED Light Cube | Spot
he new STEDI C4 cube lights bring our work light range to a whole other level. Flood beam with outstanding performance, there is a solution to every lighting need.
GIANT SLAYING PERFORMANCE
Explosive performance, hence the name C-4. The instructions to our engineers were to hold nothing back, the goal was to produce the most powerful cube light on the market. Mission accomplished. Now the adventure doesn’t have to stop when the sun goes down thanks to class-leading CREE XM-L2 emitter producing 4,200 lumens of light intensity
3 BEAM OPTIONS
The C4 comes in 3 variations of beam options to help you build the perfect lighting setup for the required application. Spot, flood or diffused. Each with their own field of usage whether you want to add some extra light off to the sides of the vehicle whilst driving or around the vehicle as work/camp lights.
COLOURED FILTERS INCLUDED
Included at no additional cost 3 x snap-on filters including 1 x blue filter (cuts down glare in reflective environments) 1 x yellow filter (cuts through fog and dust particles) 1 x STEDI black translucent filter – Instantly increase street credibility.
DETAILS
4 x CREE XM-L2 5700K
Environmentally sealed and moulded Deutsch DT-2 connector with male wire tail included
RFI and EMI suppressed circuity ensure no interference with sensitive radio equipment.
Fitted with Gore Breather Vent – Certified IP68 | Submersible to 3m
304 Series Stainless Steel Bracket and Fasteners
BEAM CHARACTERISTICS
Spot beam: Relentless, in fact we’re still shocked every time we turn it on. – Potent enough to take on the task of stealth driving light.
Diffuse Spread: A homogeneous flood beam which is smooth almost cloudy in light distribution making it an ideal near field work-light, reverse or camp light.
Wide Beam: The wide beam produces a deeper flood beam in comparison to diffuse, better suited to application require a longer throw flood beam.
SPECIFICATIONS
| LED POWER OUTPUT |
4 x 10w LEDs |
| LUMENS |
4,200Lm |
| OPERATING VOLTAGE |
12v & 24v Compatibility |
| IP RATING |
IP68 |
| LED |
CREE XML2 |
| COLOUR TEMPERATURE (CCT) |
5700K |
| MATERIAL |
Die Cast Aluminium Housing |
| LENS |
Lexan Optical |
| MOUNTING BRACKET |
Stainless Steel U-Bracket |
| BOLTS AND FITTINGS |
Included |
| BEAM TYPE |
Spot |
| LIFE SPAN |
50,000 Hours |
| AMP DRAW |
2.1A @ 13.6v |
| WEIGHT |
0.550kg |
WHAT'S IN THE BOX
- 1 x C4 Black Edition LED SpotLight
- Black Transparent Cover
- Blue Transparent Cover
- Yellow Transparent Cover
- Stainless U Mounting Bracket
- Mounting Hardware
- Male and Female Deutsch Connectors
- Vibration Dampener
STEDI 2 to 1 Deutsch Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m
Our 2 to 1 Deutsch Connector allow you to split a single plug into 2 allowing you to run 2 driving/work lights off the same switch & harness.
PLUG & PLAY
Male & Female plugs for running directly from the harness and straight into the back of your lights.
COMPATABILITY
Compatible with all wiring harnesses for LED, HID and Halogen Lights that run a DT connector. Make sure you are familiar with DT & DTP connectors as they are not cross compatible with one another.
DETAILS
2 to 1 Deutsch Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT2 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our 2 Output wiring harness
Cable Length is 900mm
Extended Length is 1500mm
SPECIFICATIONS
- 16AWG Cable
- Waterproof DT Connectors
- Cable placed inside conduit
WHAT’S IN THE BOX
- 2 to 1 Wiring Harness Splitter
STEDI LED Work Light Wiring Kit Loom Harness (Not high beam triggered)
Work Light Wiring Kit / Loom
DETAILS
STEDI - Fully Assembled Wiring kit for LED Work Lights or camp lights.
It contains everything you need to get your lights connected. Press button ON/OFF switch. The included relay is rated to 40A so you can use the one wiring kit to connect several light bars to the one wiring loom.
Featuring a total of 4.8 meters of wiring (full stretched out)
- 2.8m of cabling from Relay to Switch
- 2.0m of cabling from light connectors to Relay
- 12vDC 30A Rated Fuse Kit
- 12vDC 40A Switching Relay
- ON/OFF Switch
- UV Rated Insulation
Please note that this harness is not high beam activated, please refer to our other listing for our High Beam Trigger light harnesses.
SPECIFICATIONS
| WIRING KIT RATING |
12vDC 30A |
| RELAY RATING |
12vDC 40A |
| FUSE |
30A |
| CABLE LENGTH |
4.5m +or- |
| SWITCH TYPE |
Dime Switch |
| INSTRUCTION |
Included |
| RATED |
30A |
WHAT’S IN THE BOX
- 1 x 12v Work Light Wiring Kit
- Waterproof Dime Switch
